INNER LINER EPOXY RESIN SYSTEM
We have a Resin System to suit all different climates and environmental condition. This Resin is designed for liner installations, Patching & Junction repairs, and is compatible with the liners mentioned in each spec below. For more info contact SANIPRO today.
EX RESINS have excellent medium viscosity, and react and cure ambiently. Suitable for extremely cold locations, down to as little as 5deg Celsius. All EX Resins are characterized by high mechanical and chemical results - as well as being temperature resistance even when being ambient cured. Hardeners from both systems can also be used in a combination with SANIPRO thickosotropic epoxy base. The product is designed so that it does not run into the lateral connection.
EX2-2 RESIN
Medium viscosity reactive systems that cure ambient very fast. Suitable for short to medium installation length. Both systems are characterized by high mechanical and chemical as well as temperature resistance even when ambient cured. Hardeners from both systems can also be used in a combination with SANIKOM thickosotropic epoxy base that it does not run into the lateral or in house connection.
EX2-2 RESIN OVERVIEW
EX4-2 RESIN
Excellent low viscosity reactive system having a good pot life to cure time ratio. Suitable for short to medium installation length. This system is characterized by high mechanical and chemical as well as temperature resistance when force cured with temperature of 50-80 degC.
EX4-2 RESIN OVERVIEW
EX2i RESIN
Excellent medium viscosity reactive system having a perfect pot life to cure time ratio. Suitable for short to medium installation length there where high chemical and temperature resistance up to even 130 deg C is required. This system is characterized by high mechanical and chemical as well as temperature resistance when force cured with temperature of 50-80 degC.
EX2i RESIN OVERVIEW
EX9-15 RESIN
Low viscosity low reactive system with a very long pot life and relatively short cure time. Suitable for long installation length. Could also be used as pre impregnation system. This system is characterized by high mechanical and chemical as well as temperature resistance when force cured with temperature of 60-80 degC.
EX9-15 RESIN OVERVIEW
